My m.soft wireless optical mouse and k.board?

also have a corded tray with 2little lights on it and this have only a usb connectivity

i assume it converts infra red facts sent by mouse and k.board ,decoded by this tray and consequently sent through the cable to the usb port=into pc

in good health i cannot get this article working at all!

my current mouse/k.board is ps2 connected at 2round ports 1 for respectively device.

do i need to enter bios and switch current mouse and k.board nouns off,and switch usb support on

or what do i do.

this corded tray next to usb is neither mouse or a k.board

it wont work or is unrecognised by msoft hardware wizard

when i plug it into a usb port.help please



ps:i cannot unplug ps2 connections while notebook is on[riskdamage]

and if i switch pc sour then unplug them and switch notebook on again it will just freeze and not

nouns windows/boot up.

My m.soft wireless optical mouse and k.board?

make sure the battery are new and within is a button on the bottom of the mouse and keyboard to create the nouns to the adapter. Press and release it and it should work fine.



Unplugging a mouse or keyboard while the PC is on does not impose any type of damage.
if you remove the ps2 k/b and mouse and plug surrounded by the usb stuff then turn on your computer it should check for ps2 mouse andk/b if it does'nt find them it should automatically switch to the usb stuff while booting. save then your op/sys does'nt hold the drivers for usb stuff. have you tried switching usb ports, or unplugging any other usb stuff similar to your printer or webcam.